Incorporation of zinc into cetylpyridinium chloride mouthwash affects the composition of multispecies biofilms.

This study evaluated the effect of a mouthwash containing 0.075% cetylpyridinium chloride and 0.28% zinc lactate (CPC + Zn) in a multispecies biofilm model. A 7-days 33-species biofilm, formed on Calgary device, was 1-min treated with: 0.12% chlorhexidine (CHX), culture medium (negative control), 0.075% cetylpyridinium chloride (CPC) or CPC + Zn, 2x/day, from day 3 until day 6. The metabolic activity and the microbial composition were evaluated by colorimetric method and checkerboard DNA-DNA hybridization, respectively. The three antimicrobials (CPC, CPC + Zn and CHX) reduced metabolic activity, total biofilm count and several species counts, including Porphyromonas gingivalis, Fusobacterium nucleatum, Parvimonas micra, Campylobacter gracilis and Streptococcus mutans. However, only CPC + Zn reduced counts of the pathogen Prevotella intermedia and did not interfere with the levels of some beneficial species in relation to the negative control. The treatment of multispecies subgingival biofilm with CPC + Zn was effective in controlling periodontal pathogens and favored the colonization of health-associated bacterial species.

Adverse events of metronidazole and amoxicillin: Retrospective analysis of a large data set of five randomized clinical trials.

AIM: To evaluate the frequency of side effects associated with intake of metronidazole (MTZ) + amoxicillin (AMX) in periodontal treatment, and to explore associations between these events and patients' features. MATERIALS AND METHODS: Data of five randomized clinical trials testing MTZ + AMX adjunctive to mechanical therapy were evaluated. Volunteers answered an adverse event questionnaire. RESULTS: Information from 656 subjects was assessed. The frequency of side effects in the antibiotic- and placebo-treated groups ranged from 1.0% to 17.7% and 0.9% to 13.7%, respectively. The events more frequently observed in the antibiotic than in the placebo group were diarrhoea and metallic taste (p < .05). Diabetes significantly raised the odds of a patient reporting discomfort (odds ratio [OR] = 2.6), diarrhoea (OR = 4.0), weakness (OR = 6.0) and excessive sleepiness (OR = 2.9). In systemically healthy volunteers, using antibiotics 3 months post-mechanical treatment (healing phase) (OR = 3.0), being a woman (OR = 3.9) and aged ≤49 (OR = 4.5) significantly increased the chances of reporting adverse events. CONCLUSIONS: The occurrence of side effects during MTZ + AMX treatment ranged from uncommon (1%) to very common (17.7%). The main factors raising the chances of a patient reporting adverse events were diabetes and taking antibiotics in the healing phase, instead of in the active phase of treatment. Patients ≤ 49 years old and females also tend to report more side effects.

In vitro evaluation of enamel surface roughness and morphology after orthodontic debonding: Traditional cleanup systems versus polymer bur.

INTRODUCTION: The primary aim of this randomized in vitro study was to compare the effectiveness of carbide, fibreglass and polymer burs on resinous remnant removal after bracket debonding, by the evaluation of enamel surface roughness and morphology. The secondary objective was to compare the time dispended on the procedures. METHODS: The buccal surfaces of 28 bovine incisors were analysed by a profilometer to initial roughness measurement (Ra-T1). Brackets were bonded with a light-cured resin and debonded with a debonding plier. The samples were randomly divided into four groups, according to the bur used (n=7): A-Tungsten carbide; B-Fibreglass; C-Polymer; D-Polymer with 75% ethanol pre-treatment. The second roughness measurements were made after resin removal (Ra-T2). Time for removal procedures was also recorded. The third measurements were made after polishing (Ra-T3). Scanning Electronic Microscopy was performed in two samples of each group: after resin removal and after polishing. Results of roughness and time measurements were statically analysed by analysis of variance with post-hoc Bonferroni. RESULTS: After polishing, tungsten carbide (P=0.1555) and fibreglass burs provided final surface roughness statistically similar to the baseline condition (P=1.0000). Yet, polymer burs, associated (P<0.0001) or not to alcohol (P<0.0001), provided surface roughness significantly higher when compared to baseline values. Polymer burs were more time-consuming on resinous remnant removal than tungsten carbide and fibreglass burs (P<0.05). CONCLUSION: Polymer burs were less effective and more time-consuming to remove the remaining resin than tungsten carbide and fibreglass burs. The polishing step created smoother surfaces regardless of the burs used for resin removal.

Análisis de flexión en alambres de níquel-titanio con y sin propiedades de transformación térmica / Bending analysis of nickel-titanium wires with and no thermal transformation properties

Objetivo: Evaluar el comportamiento de los alambres de aleación de níquel-titanio con y sin propiedades de transformación térmica en la relación carga/deflexión. Materiales y método: Para ello, 30 segmentos de alambres de níquel-titanio con calibre .014" y 30 mm de largo fueron cortados, conformando 10 segmentos de alambre Flexy NiTi de Orthometric®, 10 segmentos Flexy Copper NiTi termoactivado y 10 segmentos CuNiTi de OrmcoTM. Se usó una máquina universal de ensayos Instron® para analizar el comportamiento de carga y deflexión de los segmentos en una prueba de tres puntos, registrando las fuerzas alcanzadas en 0,5 mm: 1 mm, 2 mm y 4 mm de deflexión. Resultados: Hubo una diferencia estadísticamente significativa entre todos los alambres y entre todas las deflexiones, ya que el alambre Flexy Cooper NiTi presentó la menor carga entre todas las deflexiones analizadas. Conclusión: Se concluye que los alambres termoactivados alcanzan fuerzas más leves, lo que los hace más apropiados para alineaciones iniciales, las cuales requieren un mayor rango de deflexión(AU)

A Bayesian approach to model the conditional correlation between several diagnostic tests and various replicated subjects measurements.

Two key aims of diagnostic research are to accurately and precisely estimate disease prevalence and test sensitivity and specificity. Latent class models have been proposed that consider the correlation between subject measures determined by different tests in order to diagnose diseases for which gold standard tests are not available. In some clinical studies, several measures of the same subject are made with the same test under the same conditions (replicated measurements), and thus, replicated measurements for each subject are not independent. In the present study, we propose an extension of the Bayesian latent class Gaussian random effects model to fit the data with binary outcomes for tests with replicated subject measures. We describe an application using data collected on hookworm infection carried out in the municipality of Presidente Figueiredo, Amazonas State, Brazil. In addition, the performance of the proposed model was compared with that of current models (the subject random effects model and the conditional (in)dependent model) through a simulation study. As expected, the proposed model presented better accuracy and precision in the estimations of prevalence, sensitivity and specificity. Copyright © 2017 John Wiley & Sons, Ltd.

Prevalence and Diagnosis of Latent Tuberculosis Infection in Young Children in the Absence of a Gold Standard.

INTRODUCTION: For adequate disease control the World Health Organization has proposed the diagnosis and treatment of latent tuberculous infection (LTBI) in groups of risk of developing the disease such as children. There is no gold standard (GS) test for the diagnosis of LTBI. The objective of this study was to estimate the prevalence of LTBI in young children in contact with a household case of tuberculosis (TB-HCC) and determine the accuracy and precision of the Tuberculin Skin Test (TST) and QuantiFERON-TB Gold in-tube (QFT) used in the absence of a GS. METHODS: We conducted a cross-sectional study in children up to 6 years of age in Manaus/Brazil during the years 2009-2010. All the children had been vaccinated with the BCG and were classified into two groups according to the presence of a TB-HCC or no known contact with tuberculosis (TB). The variables studied were: the TST and QFT results and the intensity and length of exposure to the index tuberculosis case. We used the latent class model to determine the prevalence of LTBI and the accuracy of the tests. RESULTS: Fifty percent of the children with TB-HCC had LTBI, with the prevalence depending on the intensity and length of exposure to the index case. The sensitivity and specificity of TST were 73% [95% confidence interval (CI): 53-91] and 97% (95%CI: 89-100), respectively, versus 53% (95%CI: 41-66) and 81% (95%CI:71-90) for QFT. The positive predictive value of TST in children with TB-HCC was 91% (95%CI: 61-99), being 74% for QFT (95%CI: 47-95). CONCLUSIONS: This is one of the first studies to estimate the prevalence of LTBI in children and the parameters of the main diagnostic tests using a latent class model. Our results suggest that children in contact with an index case have a high risk of infection. The accuracy and the predictive value of the two tests did not significantly differ. Combined use of the two tests showed scarce improvement in the diagnosis of LTBI.

Comparison of the performance of two spontaneous sedimentation techniques for the diagnosis of human intestinal parasites in the absence of a gold standard.

Performance evaluation of diagnostic tests is critical in the search for accurate diagnoses. A gold standard test is usually absent in parasitology, thus rendering satisfactory assessment of diagnostic accuracy difficult. Moreover, reliability (assessed by the study of repeatability) is a rarely studied characteristic of diagnostic tests. This study compared and evaluated the performance (repeatability, concordance and accuracy) of the spontaneous sedimentation technique (SST) and the Paratest for the diagnosis of Giardia lamblia, Entamoeba histolytica complex, Blastocystis spp., Ascaris lumbricoides, hookworm, Trichuris trichiura and Calodium hepaticum. Fecal samples of 143 individuals were separated into three replicates for each test. Concordance and homogeneity of the results between replicates of each test and between tests were evaluated. Proportions of positives, sensitivity and specificity were estimated using a Bayesian Latent Class Model. High repeatability of both tests was found for the detection of intestinal parasites, except for Blastocystis spp. and hookworm. Concordance between tests was generally high (concordance correlation coefficient, 0.72-0.88), except for Blastocystis spp., hookworm and T. trichiura. The Paratest detected more cases of Blastocystis spp. and fewer of hookworm than the SST. The tests were quite discordant in the detection of T. trichiura. A low sensitivity (39.4-49.2% for SST, 35.8-53.8% for Paratest) and a high specificity (93.2-97.2%) were found for both tests. The Paratest presented a slightly higher sensitivity for the diagnosis of Blastocystis spp. (53.8%), and SST did so for hookworm (49.2%). This is the first study on repeatability and accuracy (using a Bayesian approach) of two spontaneous sedimentation techniques. These results suggest underdiagnosis of little dense parasitic forms due to technical limitations in both tests. We conclude that the combined study of repeatability, concordance and accuracy is a key strategy for better evaluation of the performance of tests and is also useful for the identification of technical limitations.